自动上料搅拌车无法正常启动是怎么回事
The automatic loading mixer is convenient to use, not limited by the site, and is a very popular type of mixer at present.
在移动式混凝土搅拌车使用中也会遇到一些问题,例如无法启动,这是怎么回事呢?我们分析原因由以下几点:
There are also some problems in the use of mobile concrete mixer, such as unable to start, what's the matter? The reasons are as follows:
一、如果在移动式自动上料搅拌车启动时只听到启动机电磁开关发出“咯咯”声,但曲轴却不转动。这种情况有可能是蓄电池“断格”造成的。
1、 If only the electromagnetic switch of the starter makes a "cluck" sound when the mobile automatic feeding mixer starts, but the crankshaft does not rotate. This may be caused by the battery "broken grid".
二、如果极桩、极桩夹子接触不良而发热烧损,这时启动移动式自动上料搅拌车就会出现突然转动无力,并伴有烧橡胶气味或蓄电池处冒烟现象。
2、 If the pole pole and pole pole clamp are not in good contact and are heated and burned, the mobile automatic feeding mixer will suddenly turn powerless, accompanied by burning rubber smell or smoke at the battery.
三、自动上料搅拌车蓄电池自放电严重,其极板、隔板严重老化时,就会出现临时停车每次都能启动,但停车时间较长或第二天启动时却只能使曲轴转一下。那个时候您可以考虑更换蓄电池。
3、 When the battery of the automatic charging mixer is discharged seriously and its plates and partitions are aged seriously, it will appear that the temporary stop can start every time, but the stop time is long or the crank can only be turned once the next day. At that time, you can consider replacing the battery.
四、如果自动上料搅拌车启动时只有轻微“嗒”的一声,之后就再没有任何反应时,就可以是启动继电器发卡出了问题。
4、 If there is only a slight "click" when the automatic feeding mixer starts, and there is no response after that, it can be that the starting relay is jammed.
五、当自动上料搅拌车飞轮齿圈的啮合切入面变形的时候,就会出现启动时启动机驱动齿轮与发动机飞轮齿圈会发出撞击的空转声。
5、 When the meshing cut-in surface of the flywheel ring gear of the automatic feeding mixer is deformed, there will be a idling sound of impact between the driving gear of the starter and the flywheel ring gear of the engine when starting.
六、当启动机电磁开关的保持线圈错接在了电源接线柱上或钥匙开关上的3根线接错时,电源总开关一接通,就会出现自动上料搅拌车启动机驱动齿轮就和飞轮齿圈啮合在一起转动的现象。
6、 When the holding coil of the electromagnetic switch of the starting machine is wrongly connected to the power terminal or the three wires on the key switch are wrongly connected, as soon as the main power switch is turned on, there will be a phenomenon that the driving gear of the starting machine of the automatic feeding mixer engages with the flywheel ring gear to rotate together.
自动上料搅拌车无法启动常有以上几个方面的原因,大家可以根据现象进行排查。
There are several reasons why the automatic feeding mixer can not be started. You can check according to the phenomenon.
中科聚峰为您分析的关于搅拌车无法启动的原因由以上几条,希望我们的介绍对您有所帮助,更多详情资讯请继续关注我们网站http://www.cnzkjf.cn
The reason why the mixer can't be started analyzed by Zhongke Jufeng for you is from the above several points. I hope our introduction can help you. For more details, please continue to follow our website.http://www.cnzkjf.cn