1. Start in gear: The transmission with high and low speed control has a relatively large transmission ratio at low speed, so we can start in third or fourth gear when the car is empty and flat. If it is a heavy car or a slope, we must use second gear. When the vehicle is ignited and started, press the clutch and light the accelerator, look at the tachometer to about 2000 rpm, release the clutch, release the handbrake, and the vehicle starts. Engage the second gear, pull the left side back to the neutral gear, and then pull back.

２、多功能挖机搅拌车变速换挡：变速换挡要牢记加挡先加速，减挡先减速的原则。在加挡前轰油门把车速先提起来，在减挡前收油门把车速先降下来。在换挡时尽量采用两脚离合法，加挡时按照踩(离合器)、摘(空挡)、踩(离合器)、挂(高速挡)的原则，快速踩两脚离合器踏板，可以很轻松地增加挡位。

2. Shifting of the multi-function excavator mixer truck: the principle of accelerating first when shifting gears and decelerating first when shifting gears should be kept in mind. Push the accelerator to raise the speed before gear up, and pull it down before gear down. When shifting gears, try to use the method of two feet off. When shifting gears, according to the principle of stepping on (clutch), taking off (neutral), stepping on (clutch), and engaging (high speed), quickly step on the two feet of clutch pedal, which can easily increase the gear.

３、多功能挖机搅拌车高速换挡：在高速路上行驶时，一般采用1-3-5的升档模式，先低速起步，再高速换挡。例如，在低速和三档起步时，踩下油门，将油门拉回到空档，换到高速，直接换到五档。当车速提高时，直接换到7档。当汽车在三档时，车速通常在25-40英里/小时之间。如果是初学者，建议一步步加快，养成好习惯。

3. High-speed gearshift of multi-function excavator mixer truck: when driving on the highway, the 1-3-5 upshift mode is generally adopted, starting at low speed and then shifting at high speed. For example, when starting at low speed and third gear, press the accelerator, pull the accelerator back to neutral, shift to high speed, and directly shift to fifth gear. When the speed increases, shift directly to 7th gear. When the car is in third gear, the speed is usually between 25-40 mph. If you are a beginner, it is recommended to speed up step by step and form good habits.

4、上下坡换挡：上坡时要提前换入低速挡，尽可能不在坡路换挡，禁止在坡路中间变换高低速；下坡时禁止空挡滑行、禁止变换高低速；在时速高于30km/h时禁止换入低速挡，等等。

4. Shift up and down the slope: shift into low gear in advance when going up the slope, try not to shift on the slope as much as possible, and do not change high and low speed in the middle of the slope; When going downhill, it is forbidden to slide in neutral gear and change high and low speed; It is forbidden to shift into low gear when the speed is higher than 30 km/h, etc.

有了自进料混凝土搅拌车上面的小总结，希望对广大客户有所帮助，如果有什么不理解的或者寻求帮助的请点击我们的网站：http://www.cnzkjf.cn或者来电咨询，我们会尽全力为您

With the summary above the self-feeding concrete mixer, I hope it can help our customers. If you have any questions or need help, please click our website: http://www.cnzkjf.cn Or call for consultation, and we will do our best to solve it for you