自进料混凝土搅拌车的刹车系统是车辆行驶中非常重要的装置，对车辆的制动效果和稳定性有着很大的影响。下面是自进料混凝土搅拌车刹车检查的步骤：

The braking system of a self feeding concrete mixer truck is a very important safety device during vehicle operation, which has a significant impact on the braking effect and stability of the vehicle. The following are the steps for checking the brake of the self feeding concrete mixer truck:

将车辆停在平坦地面上，启动发动机，加速20~30/小时，用力踩下制动踏板，观察车辆的制动效果，判断刹车是否有明显滞后或制动不足的情况。

Firstly, park the vehicle on a flat surface, start the engine, accelerate to 20-30 km/h, firmly press the brake pedal, observe the braking effect of the vehicle, and determine whether there is significant lag or insufficient braking.

检查刹车片的磨损程度，通常刹车片厚度低于2mm即需要更换，如若发现刹车片存在严重磨损、开裂、变形等现象，需立即更换。

Check the wear level of the brake pads. Usually, if the thickness of the brake pads is less than 2mm, they need to be replaced. If severe wear, cracking, deformation, and other phenomena are found on the brake pads, they need to be replaced immediately.

检查制动液的液位，制动液位过低会导致制动效果不佳，同时也需要检查制动液管路是否存在漏油的情况。

Check the brake fluid level. If the brake fluid level is too low, it will lead to poor braking effect. At the same time, it is also necessary to check the brake fluid pipeline for oil leakage.

检查刹车盘的表面状况，如有凹坑或裂纹等明显损伤，需及时更换。

Check the surface condition of the brake disc. If there are obvious damages such as dents or cracks, they need to be replaced in a timely manner.

检查刹车系统的各个部件是否松动或损坏，如刹车片卡钳、刹车片弹簧等。

Check whether various components of the brake system are loose or damaged, such as brake pads, calipers, brake pad springs, etc.

检查手刹，拉紧手刹后将车辆挂入空挡，轻轻推动车辆，观察手刹的制动效果是否正常。

Check the handbrake, tighten the handbrake, shift the vehicle into neutral, gently push the vehicle, and observe whether the braking effect of the handbrake is normal.

7.进行路试，对车辆的制动效果和稳定性进行真实检验。

7. Conduct a road test to verify the braking effect and stability of the vehicle.

需要注意的是，刹车的检查和维护应该及时、，发现问题要及时进行处理，以保障车辆的行车。同时，检查刹车时应该、细致，将刹车系统的各个部件都检查一遍，确保车辆的制动效果正常，保障行车。欢迎您随时来我们网站http://www.cnzkjf.cn咨询更多事项！

It should be noted that the inspection and maintenance of the brakes should be timely and comprehensive, and any problems found should be promptly addressed to ensure the safety of the vehicle's operation. At the same time, when checking the brakes, it is necessary to comprehensively and meticulously inspect all components of the braking system to ensure the normal braking effect of the vehicle and ensure driving safety. Welcome to our website anytime http://www.cnzkjf.cn Consult for more matters!