自上料搅拌机轴承有哪些作用,怎么选择
The bearing of self feeding mixer is a very important part. What role does it play and how to choose?
用于自上料搅拌机的轴承主要承受径向力和轴向力。选择轴承时要同时选择轴承轴承的轴向力,如角接触球轴承、圆锥滚子轴承,或带有推力球轴承、角接触球轴承的高速轴承、圆锥滚子轴承或带有推力球轴承的动态轴承。
The bearing used for self feeding mixer mainly bears radial force and axial force. When selecting a bearing, the axial force of the bearing shall be selected at the same time, such as angular contact ball bearing, tapered roller bearing, or high-speed bearing with thrust ball bearing, angular contact ball bearing, tapered roller bearing or dynamic bearing with thrust ball bearing.
轴承支持的角色作用,即如果直接搅拌轴配合孔,行驶阻力大,磨损大,传输不容易改变,和轴承是依靠组件间的滚动接触来支撑传动部位,因此抗滑阻力小,能耗少,开始容易,等等。
The role of bearing support, that is, if the direct mixing shaft fits the hole, the driving resistance is large, the wear is large, the transmission is not easy to change, and the bearing is supported by the rolling contact between components, so the anti sliding resistance is small, the energy consumption is small, and it is easy to start, and so on.
轴承的使用寿命决定了主轴的使用寿命,进而影响主轴的使用寿命,在很多情况下,轴承是标准,通常根据需要加工轴的单位强度,按标准单位生产。在选择轴承时要选择工作稳定、噪声低的轴承,即需要进行一系列的实践和理论核算。
The service life of the bearing determines the service life of the main shaft, and then affects the service life of the main shaft. In many cases, the bearing is a national standard, which is usually produced according to the unit strength of the shaft to be processed according to the national standard. When choosing bearings, we should choose bearings with stable operation and low noise, that is, a series of practical and theoretical accounting is needed.
为了避免滑动轴承,形成内部球滑动轴承,轴承损坏,我们确信生产深沟球轴承,内圈法兰,降低了滑动轴承表面,从而减少摩擦和热量,寿命长,精度高、热值低,建议套件,高刚性、低噪音、高耐磨性等特点。
In order to avoid sliding bearing, forming internal ball sliding bearing and bearing damage, we are sure to produce deep groove ball bearing and inner ring flange, reducing the surface of sliding bearing, thus reducing friction and heat, long service life, high accuracy, low heat value, recommended kit, high rigidity, low noise, high wear resistance and other characteristics.
我们看了上面的文章是否知道了自上料搅拌机轴承的作用和选用,从上面我们知道了轴承是很重要的一部分,所以在平时使用的时候要注意保养。
We read the above article whether we know the function and selection of the bearing of the self feeding mixer. From the above we know that the bearing is a very important part, so we should pay attention to the maintenance when using it at ordinary times.
以上是中科聚峰厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.cnzkjf.cn
The above is the relevant content introduced by Zhongke Jufeng factory. To learn more, please visit the website: http://www.cnzkjf.cn