Do not stop without reason before discharging or start after feeding. The feeding amount shall not exceed the specified capacity.

搅拌工作结束后，要及时清洗自上料搅拌车，防止混凝土结块。清洗时，要防止电器设备受潮。清洗工作必须在断电后进行，以防止触电。

After mixing, the self-feeding mixer truck shall be cleaned in time to prevent concrete caking. During cleaning, electrical equipment shall be protected from moisture. The cleaning work must be carried out after power failure to prevent electric shock.

每次充电前用水冲洗进料口，使进料口在充电时保持湿润；

Flush the feed inlet with water before each charging to keep it moist during charging;

装车的同时给随车自带的清洗水箱加水；

At the same time of loading, add water to the washing water tank provided with the vehicle;

自上料搅拌车装料后冲洗进料口，清理进料口附近残留的混凝土；

Flush the feed inlet after the loading of the loading mixer and clean the residual concrete near the feed inlet;

在施工现场卸料后，冲洗卸料槽，然后在混凝土储槽中加入30-40L的清洗水；车辆返回时，保持混凝土储罐向前缓慢转动；

After unloading at the construction site, wash the unloading tank, and then add 30-40L of cleaning water into the concrete storage tank; When the vehicle returns, keep the concrete tank moving forward slowly;

下次装车前切记将混凝土储罐内的污水排出；

Remember to discharge the sewage in the concrete tank before the next loading;

每天结束时，彻底清洁混凝土储罐及进出口周围。

At the end of each day, thoroughly clean the concrete storage tank and around the inlet and outlet.