When mixing concrete with mixing equipment, some will use a lot of water, which is also an indulgence to the water source. Therefore, in this situation, it is necessary to find ways to fully integrate the design scheme and model selection of mixing equipment with the overall goal of mixing work. All kinds of different mixing processes need to be completed by the operation of different mixing equipment. When selecting the design scheme and model, it is necessary to distinguish the mixing model, electric output power and mixing rate according to the overall objectives and requirements of the processing technology for the mixing work, and then select the reducer, sound card frame, mixing shaft, water pump seal and other components. So how can we control the water consumption in the process of using mixing equipment? If you are interested in this issue, you are likely to take a look at the following detailed introduction:

在搅拌设备中生产制造自来水的利用量进一步并不是关键的自来水阶段。因混泥土凝结后十分的难以，因此每日冲洗搅拌机、罐车需要用去很多的水。那麼我们理应如何把持混凝土全自动搅拌车备的用水量呢？我陪你了解。

The utilization of tap water produced in the mixing equipment is further not the key tap water stage. It is very difficult to solve the problem after the concrete is set, so it needs a lot of water to wash the mixer and tank truck every day. So how should we control the water consumption of the automatic concrete mixer? I'll get to know you.

1.根据发展减水剂的摄入量或利用率高减水率的减水剂，选择适应能力不错的减水剂跟混凝土种类。改进沙石配合比，找到每一个砂浆配合比的沙石配合比来改进跟易性，进而降低用水量。

1. According to the intake of water reducing agent or water reducing agent with high water reducing rate, select water reducing agent and concrete with good adaptability. Improve the sand stone mix proportion, find the sand stone mix proportion of each mortar mix proportion to improve the workability and reduce the water consumption.

2.要严苛检验各材料功能把持好之上各要素来着陆用水量。根据利用高摄入量的胶凝材料来改进跟易性。多检验沙石的含水量，提升责任心，保证每一次产出率混泥土的塌落度在把持范围内。

2. Strictly inspect the function of each material and control the above elements to land the water consumption. According to the use of high intake of cementitious materials to improve the workability. Check the water content of sand and stone more, improve the sense of responsibility, and ensure that each output rate and the slump of concrete are within the control range.

3.与搅拌设备施工工地施工单位沟通交流很重要，要得到施工队伍的了解，多与施工单位方法工作人员开展相互配合防止塌落度过大。恰当的观念：并不是塌落度越大，水下混凝土便会越随便，而应调济跟易性及砂砾石使用量来调济。

3. It is very important to communicate with the construction unit of the mixing equipment construction site, get the understanding of the construction team, and cooperate with the method staff of the construction unit to prevent excessive collapse. Proper concept: it is not that the greater the slump, the more casual the underwater concrete will be. Instead, it should be adjusted according to the economic workability and the use of sand and gravel.

这种全是十分合理的很有可能把持搅拌设备用水量的方式，大伙儿在实际操作的过程中一定要留心了，以防导致水源的放纵。

This is a very reasonable way to control the water consumption of mixing equipment. We must pay attention to it in the process of actual operation to prevent the indulgence of water source.