1.根据混合，破碎和粉碎机的注入量，实际排量和施工时间，计算建筑物中使用的混合，破碎和粉碎机的数量。

1. According to the injection quantity, actual displacement and construction time of mixing, crushing and pulverizing machines, the number of mixing, crushing and crushing machines used in the building is calculated.

2.根据项目目的和特点，应综合考虑所需的运输距离，施工计划，泵的形状，搅拌车的具体条件和浇筑位置的选择。

2. According to the purpose and characteristics of the project, the required maximum transportation distance, construction plan, pump shape, specific conditions of mixer truck and selection of pouring location shall be comprehensively considered.

3.自动混凝土搅拌车具有适应结构的灵活性。动臂高度越高，织物的倾卸高度和半径越大，并且结构完整性越强。高臂搅拌机应尽可能在建筑物中使用。

3. The automatic concrete mixer has the flexibility to adapt to the structure. The higher the boom height, the larger the dumping height and radius of the fabric, and the stronger the structural integrity. High boom mixers should be used in buildings as far as possible.

4.混合，给料，自动混凝土搅拌车的结构和性能随机不同。选择模型时，除了浇筑的数量外，还应考虑建筑物的类型和结构，施工技术要求，工地条件和环境。通常，混合，进料和自动混凝土搅拌车的主要性能参数必须匹配或略大于结构要求。如果容量太大而使用量太低或太小，不仅会满足要求，而且会加速混合，进料和破碎一体机的损失。

4. The structure and performance of mixing, feeding and automatic concrete mixer are different randomly. When selecting the model, in addition to the quantity of pouring, the type and structure of the building, construction technical requirements, site conditions and environment should also be considered. In general, the main performance parameters of mixing, feeding and automatic concrete mixers must match or slightly exceed the structural requirements. If the capacity is too large and the usage is too low or too small, it will not only meet the requirements, but also accelerate the loss of mixing, feeding and crushing machine.

自动混凝土搅拌车选择考虑因素你学会了吗？

Have you learned the factors to consider in the selection of automatic concrete mixer?