自动上料搅拌机出车前后要注意的问题
Zhongke Jufeng automatic loading mixer is a kind of vehicle commonly used in the construction industry at present. Some problems should be paid attention to before and after using this kind of vehicle.
一、外出检查内容:
1、 Out of office inspection content:
1. 遵守交通规则,不要酒后驾车。
1. Obey the traffic rules and don't drink and drive.
2. 检查车牌、驾驶证、部分证件是否齐全。
2. Check whether the license plate, driver's license and some certificates are complete.
3.检查发动机、机油、柴油、水和电池液是否充足。
3. Check whether the engine, engine oil, diesel oil, water and battery fluid are sufficient.
4. 检查液压油和滚筒动力是否正常。
4. Check whether the hydraulic oil and roller power are normal.
5. 检查轮胎气压和钢板螺丝是否松动。
5. Check whether the tire pressure and steel plate screws are loose.
6. 检查照明仪表、喇叭、气压、转向机构、脚刹、手刹是否有效。
6. Check whether the lighting instrument, horn, air pressure, steering mechanism, foot brake and hand brake are safe and effective.
7. 泵车进入现场后,观察地形,稳定的泵车现场必须平整坚硬,无障碍物,无高压电线,并能使罐车容易接近。抬起手臂时,要确保支撑腿牢固可靠。
7. After the pump truck enters the site, first observe the terrain. The stable pump truck site must be flat and hard, free of obstacles and high-voltage wires, and easy for the tank truck to access. When lifting the arm, make sure the support leg is firm and reliable.
二、车辆验收后检查内容:
2、 Inspection contents after vehicle acceptance:
1. 清洗车身和滚筒杂物。
1. Clean the body and roller sundries.
2. 清洁电池和驾驶室。
2. Clean the battery and cab.
3.将水放入储气罐,拉手刹,锁好门。
3. Put the water into the air tank, pull the hand brake and lock the door.
4. 加汽油和柴油,在下一班前做好准备。
4. Add gasoline and diesel, and get ready before the next shift.
5. 当泵车完成或需要转移时,应将吊杆依次折叠并放置在支架上,并将支撑腿完全缩回并锁紧。
5. When the pump truck is completed or needs to be transferred, the suspender shall be folded in turn and placed on the bracket, and the support leg shall be fully retracted and locked.
中科聚峰自动上料搅拌机在上车前司机不得饮酒,这是对自己生命的负责,也是对他人生命的负责。
The driver of Zhongke Jufeng automatic feeding mixer is not allowed to drink before getting on the train, which is responsible for his own life and the life of others.