小型混凝土自动搅拌车漏油、渗漏、杂音等问题都会影响车辆的性能和性，需要及时处理。处理方法：

Oil leakage, leakage, noise and other issues of small concrete automatic mixer trucks can affect the performance and safety of the vehicle, and need to be addressed in a timely manner. Handling method:

漏油问题处理：定位漏油位置。漏油的位置可能在引擎、变速箱、转向装置、液压系统等任何地方，需要仔细寻找。

Oil leakage problem handling: locate the location of the oil leakage. The location of the oil leak may be anywhere in the engine, gearbox, steering device, hydraulic system, etc. It needs to be carefully searched.

更换密封件。漏油往往是由于密封件老化、磨损等原因造成的，需要更换相应的密封件，如油封、O形圈等。清洗漏油区域。漏油区域需要保持清洁，防止油渍积累对车身和零件造成腐蚀和损害。

Replace the seal. Oil leakage is often caused by aging, wear, and other reasons of the sealing components, and corresponding sealing components need to be replaced, such as oil seals, O-rings, etc. Clean the oil leakage area. The oil leakage area needs to be kept clean to prevent the accumulation of oil stains from causing corrosion and damage to the body and parts.

渗漏问题处理：定位渗漏位置。渗漏位置可能在罐体、导管、输送带等地方，需要检查和定位。更换密封件。如果渗漏是由于密封件老化、磨损等原因造成的，需要及时更换相应的密封件。检查管路连接。管路连接处是否存在松动或者损坏，需要及时修复或更换。

Leakage problem handling: locate the leakage location. The leakage location may be in the tank body, conduit, conveyor belt, etc., and needs to be checked and positioned. Replace the seal. If the leakage is caused by aging or wear of the sealing element, it is necessary to replace the corresponding sealing element in a timely manner. Check the pipeline connections. Whether there is looseness or damage at the pipeline connection, it needs to be repaired or replaced in a timely manner.

杂音问题处理：定位杂音来源。杂音可能来自于传动系统、发动机、变速箱、转向装置等地方，需要仔细检查和定位。更换易损耗部件。杂音可能是由于易损耗部件磨损和老化等原因造成的，需要及时更换。调整零部件。如调整轮胎气压、发动机的怠速等，以杂音。

Handling noise issues: Identify the source of noise. The noise may come from areas such as the transmission system, engine, gearbox, steering gear, etc., and requires careful inspection and positioning. Replace easily worn parts. The noise may be caused by wear and aging of easily worn parts, and it needs to be replaced in a timely manner. Adjust components. Adjust tire pressure, engine idle speed, etc. to eliminate noise.

需要注意的是，以上处理方法需要在技师的指导下进行，以确保处理的和有效性。更多相关事项欢迎来我们网站http://www.cnzkjf.cn咨询了解！

It should be noted that the above treatment methods need to be carried out under the guidance of professional technicians to ensure the safety and effectiveness of the treatment. Welcome to our website for more related matters http://www.cnzkjf.cn Consultation and understanding!