开混凝土全自动搅拌车，对有经验的驾驶员来说，一般的驾驶常识都会。在此要提醒的是，由于混凝土是流态的，在车辆急转弯的时候，一定要降低速度，以免混凝土转弯时产生的离心力使车辆不稳！

Driving a fully automatic concrete mixer truck is a general safety driving knowledge for experienced drivers. It should be noted that due to the fluidity of concrete, it is necessary to reduce the speed of the vehicle during sharp turns to avoid the centrifugal force generated by the concrete during the turn making the vehicle unstable!

搅拌车多装混凝土有哪些影响？

What are the effects of loading more concrete on mixing trucks?

9方以下的搅拌车装多了混凝土，车子在爬坡过程中会漏洒；12方搅拌车装多了混凝土，搅拌会分层，混凝土砂率就偏低，石子粒径偏大，到工地泵送石子多。

Mixing trucks with a capacity of less than 9 cubic meters are overloaded with concrete, which may leak during climbing; The 12 square mixer truck is loaded with too much concrete, and the mixing will be layered. The sand content of the concrete is low, and the particle size of the stones is too large, resulting in more stones being pumped to the construction site.

新搅拌车一般开几年就比较容易出问题？

How many years does a new mixer truck usually go wrong?

拉干料一般是五年，湿料一般是七年，一般搅拌车在3年以后容易出现问题，搅拌车的问题与个人保养及生产厂家有很大的关系。

Dry materials usually take five years, while wet materials usually take seven years. Generally, mixing trucks are prone to problems after three years. The problems with mixing trucks are closely related to personal maintenance and the manufacturer.

混凝土凝固在搅拌车里怎么办？

What should I do if concrete solidifies in a mixing truck?

混凝土凝固后，其主要成分是硅酸二钙、硅酸三钙。理论上讲，盐酸可以与之反应解除其固态形状。但实际上很难操作，因为搅拌车的料口很小，盐酸量难以控制，且盐酸也可以与搅拌车罐体发生反应。实际出现这种情况，往往是用电焊或气割切开罐体，然后将凝固的混凝土机械破碎。

After the concrete solidifies, its main components are dicalcium silicate and tricalcium silicate. In theory, hydrochloric acid can react with it to release its solid form. But in reality, it is difficult to operate because the material inlet of the mixer truck is very small, and the amount of hydrochloric acid is difficult to control, and hydrochloric acid can also react with the tank body of the mixer truck. In reality, this situation often occurs by cutting open the tank body with electric welding or gas cutting, and then mechanically crushing the solidified concrete.

搅拌车上装指的是什么？

What does it mean to install on a mixing truck?

搅拌车上装指的是搅拌车除底盘挡泥板以外的东西，包括搅拌罐体及支座，进出料斗，液压系统及减速器，水箱及管路，操作连杆机构等。

The installation on the mixer truck refers to the things other than the chassis mudguard, including the mixing tank and support, inlet and outlet hopper, hydraulic system and reducer, water tank and pipeline, operating linkage mechanism, etc.

小方量搅拌车的液压泵是选定量泵好还是变量泵好？

Is it better to choose a volume pump or a variable pump for the hydraulic pump of a small volume mixer truck?

液压泵是搅拌车的主要构件，一般6方以下的搅拌车是标配的定量泵，不过建议客户选装变量泵。

The hydraulic pump is the main component of the mixing truck. Generally, mixing trucks below 6 square meters are equipped with a fixed displacement pump as standard. However, it is recommended that customers choose to install a variable displacement pump.

搅拌车的焊接工艺是怎样的？

What is the welding process for a mixer truck?

现在一般厂家都对整个车子的焊接采用全自动无缝焊接，环缝和纵缝均采用全自动无缝焊接。

Nowadays, most manufacturers use fully automatic seamless welding for the entire vehicle, with both circumferential and longitudinal seams using fully automatic seamless welding.

搅拌车的付款方式是什么样的？

What is the payment method for the mixer truck?

搅拌车的付款方式有多种，可以全款购车也可以分期付款，全款购车一般厂家会有一定的优惠，分期付款无优惠，且利息与银行利息持平。

There are various payment methods for mixing trucks, including full payment and installment payment. Generally, manufacturers offer certain discounts for full payment, but installment payment does not offer any discounts, and the interest is the same as the bank interest.

混凝土全自动搅拌车出料费劲怎么办？除加水外有无更好办法？

What should I do if the fully automatic concrete mixer truck is laborious in discharging? Is there a better way besides adding water?

如果是因为混凝土的原因，那就要看看是坍落度太小还是混凝土强度太高，还是混凝土太黏不好下的原因，以上原因可根据施工要求适当调整一下混凝土；如果总是不好下，就要考虑是否叶片角度和下料口那块有问题。您还有什么需求就来我们网站http://www.cnzkjf.cn咨询吧！

If it is due to concrete, then it should be checked whether the slump is too low, the concrete strength is too high, or the concrete is too sticky and difficult to lay. The above reasons can be adjusted appropriately according to the construction requirements of the concrete; If it is always difficult to lower, it is necessary to consider whether there is a problem with the blade angle and the cutting port. If you have any further needs, please come to our website http://www.cnzkjf.cn Consult!