What are the reasons why the mixing shaft of the automatic feeding mixer stops rotating

自动上料搅拌车集上料、搅拌为一体，节省人力物力，被广泛应用。自动上料搅拌车如有物料那么不能停止搅拌，防止物料凝固，有不少客户遇到过自上料混凝土搅拌车在使用的过程中会出现搅拌轴停止转动的现象，出现这种情况一般都是什么原因造成的呢?

Automatic feeding mixer integrates feeding and mixing, saves manpower and material resources, and is widely used. If the automatic loading mixer has materials, it cannot stop mixing to prevent the materials from solidification. Many customers have encountered the phenomenon that the mixing shaft stops rotating during the use of the self loading concrete mixer. What is the general reason for this situation?

自上料搅拌车搅拌轴停止转动的原因及方法

Causes and solutions of stopping rotation of mixing shaft of self loading mixer

一、自上料搅拌车搅拌轴停止转动的原因：在生产过程中当出现混凝土自上料搅拌车搅拌轴停止转动或是转动有点缓慢都是正常现象，如果这种情况停机检查，看看有没有出现下列三种情况。

1、 Reasons for stopping the rotation of the mixing shaft of the self loading mixer: it is normal that the mixing shaft of the concrete self loading mixer stops rotating or rotates a little slowly during the production process. If this is the case, first stop the machine and check to see if the following three situations occur.

1、电机传动皮带有没有出现松动的情况？自拌混凝土搅拌车电机传动皮带过松也能导致商品混凝土拌合机搅拌轴转动缓慢或者停止转动，电机传动皮带过松，导致传递的动力不足。

1. Is the motor drive belt loose? The loose motor drive belt of the self mixing concrete mixer can also cause the mixing shaft of the commercial concrete mixer to rotate slowly or stop rotating. The loose motor drive belt will lead to insufficient power transmission.

2、有没有严重超载？自拌混凝土搅拌车搅拌轴如果超过正常工作负荷，会使搅拌轴转动缓慢，若负荷过大，就会导致搅拌轴停转或者是搅拌轴弯曲。

2. Is there a serious overload? If the mixing shaft of the self mixing concrete mixer exceeds the normal working load, the mixing shaft will rotate slowly. If the load is too large, the mixing shaft will stop or the mixing shaft will be bent.

3、搅拌叶片或侧叶片与筒体内壁间有没有大的异物？出现这种情况也会使混凝土自动上料搅拌车搅拌轴停止转动或转动缓慢。搅拌叶片或侧叶片与罐内壁间有较大的异物也会导致搅拌轴停转，之所以能卡存异物，就是由于搅拌叶片或侧叶片与罐内壁间隙过大造成的，尤其是石子。

3. Is there any large foreign matter between the mixing blade or side blade and the inner wall of the cylinder? This situation will also make the mixing shaft of the automatic concrete feeding mixer stop rotating or rotate slowly. There are large foreign matters between the mixing blade or side blade and the inner wall of the tank, which will also lead to the stop of the mixing shaft. The reason why foreign matters can be stuck is due to the excessive gap between the mixing blade or side blade and the inner wall of the tank, especially stones.

本文的精彩内容由混凝土全自动搅拌车厂家提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.cnzkjf.cn我们有专门的客服为您解答问题

The wonderful content of this article is provided by the concrete automatic mixer manufacturer. There are many wonderful content on this website. You can click to enter more content: http://www.cnzkjf.cn We have special customer service to answer your questions