3.0方自动上料搅拌车——刹车步骤
If the 3.0 m3 automatic feeding mixer is running, it will brake in case of emergency. Since braking is also a learning problem, it is important to acquire braking skills.
1,下坡制动
1. Downhill braking
推动尾部系统,然后挤压前部系统,以防止装卸车的前部下沉,并在不压下进料轮的情况下主动增加尾轮的重量。
First push the rear system, then squeeze the front system to prevent the front of the loader from sinking, and actively increase the weight of the tail wheel without pressing down the feed wheel.
2,在脚趾和脚后部之间踩刹车。
2. Step on the brake between the toe and the back of the foot.
使用脚制动器不如使用脚制动器快。立即将整个制动踏板推到底,以化制动能力。从人们正常操作制动器的方式可以看出驾驶水平。按下制动器时,3.0方自动上料搅拌车立即停止。即使汽车停止,也无法停止。
Using the foot brake is not as fast as using the foot brake. Immediately push the entire brake pedal all the way to maximize braking capacity. The level of driving can be seen in the way people normally operate the brakes. When the brake is pressed, the 3.0 automatic feeding mixer stops immediately. Even if the car stops, it can't stop.
3,乘客刹车稳定
3. The passenger brake is stable
当乘客坐在后座上时,头部和轿厢部件的重量相对平均,但是随着轿厢重量的增加,惯性增加,所需制动力也增加。踩下制动器后,后排乘客尚未准备好进行保护,可能会撞到椅子。
When the passenger is sitting on the back seat, the weight of the head and car parts is relatively average, but with the increase of the weight of the car, the inertia increases, and the required braking force also increases. When the brake is applied, the rear passengers are not ready to protect and may hit the chair.
4,熟练使用油门
4. Skillfully use the throttle
除了脚制动器,还需要节气门来控制速度。为了达到距离,需要减速时可以松开油门,并且可以适当安装脚制动器以方便速度控制。这些是踩刹车的技术。特定的3.0方自动上料搅拌车的所有者可以根据自己的需要进行学习。重要的是要了解良好的驾驶风格。重要的是,不仅要了解3.0方自动上料搅拌车的性能,而且要了解3.0方自动上料搅拌车的责任。
In addition to the foot brake, a throttle is needed to control speed. In order to achieve a safe distance, the throttle can be released when deceleration is needed, and the foot brake can be properly installed to facilitate speed control. These are the techniques of stepping on the brakes. The owner of the specific 3.0 automatic feeding mixer can learn according to his own needs. It is important to understand good driving style. It is important to understand not only the performance of the 3.0 m3 automatic feeding mixer, but also the safety responsibility of the 3.0 m3 automatic feeding mixer.
5,速度慢时倾斜
5. Tilt when the speed is slow
转向前先调整速度:制动器,变速杆,泵;在紧急情况下,如果突然发现障碍物,请立即停止倾斜,拉直门框并踩下制动器。
Adjust the speed before turning: brake, gear lever, pump; in case of emergency, if you suddenly find obstacles, please stop tilting immediately, straighten the door frame and press the brake.
3.0方自动上料搅拌车的正确刹车步骤情况了解就是这样,希望对你有帮助。
This is the correct braking procedure of the 3.0 automatic feeding mixer. I hope it will help you.